Monthly Archives: September 2015

Precision Digital News

25/09/15

Featured Product Featured Video Be introduced to Precision Digital’s Premier Products; our most popular display and control solutions. Watch this brief overview of the ProVu, ProtEX, Trident, and Loop Leader series and quickly find the product best for your application. Watch video → In the next issue… The NEW Predig.com in Depth PD2 Large Display […]

Precision Digital – The Current Quandary: Ground Loops & Non-isolated Commons

25/09/15

Any installer of industrial process control equipment will tell you that ground loops are one of the most frustrating signal connection errors to diagnose and repair. The steps required in order to troubleshoot them are often equated to something as mysterious as magical incantations. Issues caused by shared, non-isolated commons are viewed with a similar […]

Siemens – The New Enhanced HydroRanger 200 HMI

21/09/15

The Best Ultrasonic Controller Just Got Better For close to thirty years, the HydroRanger has been the water industry standard for level measurement in water/ wastewater monitoring and pumping, inventory management, open channel monitoring, and anything in between. Now we’ve made the best even better!! The enhanced HydroRanger 200 gives you unparalleled ease of use, […]

Labom – Hygienic measurement in explosive environments

15/09/15

LABOM thermometer with thermowell has ATEX and SIL2 approval Hude, September 15th 2015. The resistance thermometer GA2730 Minitherm of LABOM has a matching range of thermowells for hygienic temperature measurement and is approved for use in explosive environments. In addition the Pt100 element meets the SIL2 safety requirements of EN 61508 for functional safety. The […]

MultiCon – Application 60: Recording single element parameters

01/09/15

One of many ways to use conditional data recording is recording single element parameters. For instance, in print applications MultiCon together with a slotted sensor or any other presence sensor can save in its own memory samples not only at an indicated frequency, but also every time an object occurs in the sensor zone. Thanks […]

MultiCon – Application 59: Indicated number of heating profiles

01/09/15

In numerous industrial sites MultiCon is used for annealing process management. In such processes, the key is the rate of temperature increase/decrease, as well as the time the elements spend in target temperature-established state. However, there are systems in which the key is not the time, but the number of cycles. Because MultiCon is such […]

Our Partners

Valve Solutions Siemens Fox Thermal Instruments, Inc. Thermo-Electra Simex Pyropress Engineering Company Ltd Precision Digital Labom Industrielle Messtechnik Process Sensors Corporation Burkert Fluid Control Systems Micronics

Accreditations

Safecontractor ISO 9001

Sign up and subscribe to our newsletter